IHaunch Interface

Represents a haunch

Namespace:  TSD.API.Remoting.Structure
Assembly:  TSD.API.Remoting (in TSD.API.Remoting.dll) Version: 0.22.4.0116
Syntax
public interface IHaunch

The IHaunch type exposes the following members.

Properties
  NameDescription
Public propertyBuiltUpPlateFlangeThickness
Gets the built-up plate flange thickness
Public propertyBuiltUpPlateFlangeWidth
Gets the built-up plate flange width
Public propertyBuiltUpPlateWebThickness
Gets the built-up plate web thickness
Public propertyCutSection
Gets the cut section
Public propertyCutType
Gets the type of the haunch cut
Public propertyCutWidth
Gets the width of the haunch cut (in [mm])
Public propertyDepth
Gets the depth, Dh (in [mm])
Public propertyDepthOption
Gets the haunch depth option
Public propertyEndPlate
Gets the end plate
Public propertyFabrication
Gets the fabrication
Public propertyFlangePosition
Gets the flange position the haunch is attached to
Public propertyGamma
Gets the value of Gamma (in [rad])
Public propertyLength
Gets the length, Lh (in [mm])
Public propertyMaxCutDepth
Gets the maximum cut depth (in [mm])
Public propertyMaxCutDepthKnown
Gets a value indicating whether the maximum cut depth can be calculated
Public propertyMemberSpanEnd
Gets the end of the member span the haunch is attached to
Public propertyMemberSpanInfo
Gets the info of the member span the haunch is attached to
Public propertyOffset1
Gets the value of offset 1 (in [mm])
Public propertyOffset2
Gets the value of offset 2 (in [mm])
Public propertyPortalFrameRafterPosition
Gets the position of the rafter the haunch is attached to
Public propertySectionDerivation
Gets the derivation of the haunch section
Public propertySteel
Gets the steel
Top
See Also