![]() | IPileType Properties |
The IPileType type exposes the following members.

Name | Description | |
---|---|---|
![]() | AdjustedMass |
Gets the mass from the AdjustedVolume and the density of Material (in [kg])
|
![]() | AdjustedVolume |
Gets the volume adjusted by the VolumeAdjustmentPercentage factor (in [mm³])
|
![]() | AxialCompressiveResistance |
Gets the axial compressive resistance (in [N])
|
![]() | AxialCompressiveResistanceEcStr |
Gets the axial compressive resistance STR (in [N])
|
![]() | AxialTensileResistance |
Gets the axial tensile resistance (in [N])
|
![]() | AxialTensileResistanceEcStr |
Gets the axial tensile resistance STR (in [N])
|
![]() | CompressionLimitVertical |
Gets the limit of vertical compression (in [N])
|
![]() | CompressionStiffnessVertical |
Gets the vertical compression stiffness (in [N/mm])
|
![]() | CrossSectionalArea |
Gets the cross-sectional area (in [mm²])
|
![]() | Description |
Gets the description of the shape and size
|
![]() | Dimension |
Gets the dimension (in [mm])
|
![]() | Embedment |
Gets the embedment (in [mm])
|
![]() | HorizontalRestraint |
Gets the horizontal restraint
|
![]() | HorizontalStiffness |
Gets the horizontal stiffness (in [N/mm])
|
![]() | Id |
Gets the id
|
![]() | LateralResistance |
Gets the lateral resistance (in [N])
|
![]() | LateralResistanceStr |
Gets the lateral resistance against STR (in [N])
|
![]() | Length |
Gets the length (in [mm])
|
![]() | Linearity |
Gets the linearity
|
![]() | LoadTransferType |
Gets the load transfer type
|
![]() | Material |
Gets the material
|
![]() | MaterialType |
Gets the material type
|
![]() | Name |
Gets the name
(Inherited from IHaveName.) |
![]() | PileTypeInstallationType |
Gets the installation type
|
![]() | PileTypeShape |
Gets the shape
|
![]() | ReinforcementGrade |
Gets the grade of the reinforcement bars
|
![]() | ReinforcementMass |
Gets the reinforcement mass (in [kg])
|
![]() | ReinforcementVolumePercentage |
Gets the percentage of reinforcement in the total volume
|
![]() | TensionLimitVertical |
Gets the limit of vertical tension (in [N])
|
![]() | TensionStiffnessVertical |
Gets the vertical tension stiffness (in [N/mm])
|
![]() | VolumeAdjustmentPercentage |
Gets the adjustment percentage of the volume
|
