IMemberAttributeSet Interface

Represents parameters required to create a member

Namespace: TSD.API.Remoting.Structure.Create
Assembly: TSD.API.Remoting (in TSD.API.Remoting.dll) Version: 0.22.4.0116

Syntax

C++

Copy

public interface IMemberAttributeSet : IMemberAttributeSetBase, 
	IAttributeSet, ICanBeUpdated, IDisposable, IAsyncDisposable

Public Interface IMemberAttributeSet
	Inherits IMemberAttributeSetBase, IAttributeSet, ICanBeUpdated, IDisposable, 
	IAsyncDisposable

public interface class IMemberAttributeSet : IMemberAttributeSetBase, 
	IAttributeSet, ICanBeUpdated, IDisposable, IAsyncDisposable

type IMemberAttributeSet =  
    interface
        interface IMemberAttributeSetBase
        interface IAttributeSet
        interface ICanBeUpdated
        interface IDisposable
        interface IAsyncDisposable
    end

The IMemberAttributeSet type exposes the following members.

Properties

	Name	Description
	Active	Gets a value indicating whether the member is active
	Alignment	Gets the span alignment
	AllowanceForOpeningLeft	Gets the allowance for opening left (in [mm])
	AllowanceForOpeningRight	Gets the allowance for opening right (in [mm])
	AllowAutomaticJoinAtEnd	Gets a value indicating whether the member joins automatically at end node
	AllowAutomaticJoinAtStart	Gets a value indicating whether the member joins automatically at start node
	AutoAlign	Gets a value indicating whether automatic alignment will be applied when the member is created in the model
	AutoDesign	Gets a value indicating whether sections from the design section order will be considered during the design process
	AutoDesignOption	Gets the auto-design option
	ConcreteDensityClass	Gets the concrete density class
	ConcreteType	Gets the concrete type
	ConsiderFlanges	Gets a value indicating whether to consider flanges
	Construction	Gets the member construction
	CurvedEccentricity	Gets the curved eccentricity (in [mm])
	CurvedOption	Gets the CurvedOption
	ElementSection	Gets the element section (Inherited from IMemberAttributeSetBase.)
	ElementType	Gets the element type
	EndReleases	Gets the end span releases (Inherited from IMemberAttributeSetBase.)
	Fabrication	Gets the member fabrication
	GravityOnly	Gets a value indicating whether the member is designed for gravity combinations only
	Id	Gets the ID of this set (Inherited from IAttributeSet.)
	IncludeFlangesInAnalysis	Gets a value indicating whether the flanges are included in the analysis
	IncreaseReinforcementIfDeflectionCheckFails	Gets a value indicating whether to increase the reinforcement if the deflection check fails
	IsolatedBeam	Gets a value indicating whether the member is isolated
	Material	Gets the material (Inherited from IMemberAttributeSetBase.)
	MaterialType	Gets the material type
	MaxFacetError	Gets the maximum facet error (in [mm])
	MemberType	Gets the member type
	NominalCoverBeamBottomEdge	Gets the nominal cover on bottom edge (in [mm])
	NominalCoverBeamEnds	Gets the nominal cover on ends (in [mm])
	NominalCoverBeamTopEdge	Gets the nominal cover on top edge (in [mm])
	NominalCoverSectionSide	Gets the nominal cover on section side (in [mm])
	PermissibleIncreaseInReinforcement	Gets the permissible increase in the reinforcement (in [mm])
	RotationAngle	Gets the rotation angle (in [rad]) (Inherited from IMemberAttributeSetBase.)
	RotationOption	Gets the rotation option (Inherited from IMemberAttributeSetBase.)
	StartReleases	Gets the start span releases (Inherited from IMemberAttributeSetBase.)
	StructureSupportingSensitiveFinishes	Gets a value indicating the structure supporting sensitive finishes
	UserFlangeDepthLeft	Gets the left flange depth if it has fixed dimensions (in [mm])
	UserFlangeDepthRight	Gets the right flange depth if it has fixed dimensions (in [mm])
	UserFlangeLeft	Gets a value indicating whether the left flange dimensions are fixed instead of being calculated from the neighbor distance and slab
	UserFlangeRight	Gets a value indicating whether the right flange dimensions are fixed instead of being calculated from the neighbor distance and slab
	UserFlangeWidthLeft	Gets the left flange width if it has fixed dimensions (in [mm])
	UserFlangeWidthRight	Gets the right flange width if it has fixed dimensions (in [mm])
	UseSlabForStiffnessCalculationEndMajor	Gets a value indicating whether the slab should be used for the stiffness calculation at end node in major direction
	UseSlabForStiffnessCalculationEndMinor	Gets a value indicating whether the slab should be used for the stiffness calculation at end node in minor direction
	UseSlabForStiffnessCalculationStartMajor	Gets a value indicating whether the slab should be used for the stiffness calculation at start node in major direction
	UseSlabForStiffnessCalculationStartMinor	Gets a value indicating whether the slab should be used for the stiffness calculation at start node in minor direction

Top

Methods

	Name	Description
	UpdateAsync	Updates this object (Inherited from ICanBeUpdated.)

Top

Reference

TSD.API.Remoting.Structure.Create Namespace