![]() | IConcreteBeamAttributeSet Properties |
The IConcreteBeamAttributeSet type exposes the following members.

Name | Description | |
---|---|---|
![]() | Active |
Gets a value indicating whether the member is active
|
![]() | Alignment |
Gets the span alignment
|
![]() | AllowanceForOpeningLeft |
Gets the allowance for opening left (in [mm])
|
![]() | AllowanceForOpeningRight |
Gets the allowance for opening right (in [mm])
|
![]() | AllowAutomaticJoinAtEnd |
Gets a value indicating whether the member joins automatically at end node
|
![]() | AllowAutomaticJoinAtStart |
Gets a value indicating whether the member joins automatically at start node
|
![]() | AutoAlign |
Gets a value indicating whether automatic alignment will be applied when the member is created in the model
|
![]() | AutoDesign |
Gets a value indicating whether sections from the design section order will be considered during the design process
|
![]() | AutoDesignOption |
Gets the auto-design option
|
![]() | ConcreteDensityClass |
Gets the concrete density class
|
![]() | ConcreteType |
Gets the concrete type
|
![]() | ConsiderFlanges |
Gets a value indicating whether to consider flanges
|
![]() | Construction |
Gets the member construction
|
![]() | ElementSection |
Gets the element section
(Inherited from IMemberAttributeSetBase.) |
![]() | EndReleases |
Gets the end span releases
(Inherited from IMemberAttributeSetBase.) |
![]() | Fabrication |
Gets the member fabrication
|
![]() | GravityOnly |
Gets a value indicating whether the beam is designed for gravity combinations only
|
![]() | Id |
Gets the ID of this set
(Inherited from IAttributeSet.) |
![]() | IncludeFlangesInAnalysis |
Gets a value indicating whether the flanges are included in the analysis
|
![]() | IncreaseReinforcementIfDeflectionCheckFails |
Gets a value indicating whether to increase the reinforcement if the deflection check fails
|
![]() | IsolatedBeam |
Gets a value indicating whether the member is isolated
|
![]() | Material |
Gets the material
(Inherited from IMemberAttributeSetBase.) |
![]() | MaterialType |
Gets the material type
|
![]() | MemberType |
Gets the member type
|
![]() | NominalCoverBeamBottomEdge |
Gets the nominal cover on bottom edge (in [mm])
|
![]() | NominalCoverBeamEnds |
Gets the nominal cover on ends (in [mm])
|
![]() | NominalCoverBeamTopEdge |
Gets the nominal cover on top edge (in [mm])
|
![]() | NominalCoverSectionSide |
Gets the nominal cover on section side (in [mm])
|
![]() | PermissibleIncreaseInReinforcement |
Gets the permissible increase in the reinforcement (in [mm])
|
![]() | RotationAngle |
Gets the rotation angle (in [rad])
(Inherited from IMemberAttributeSetBase.) |
![]() | RotationOption |
Gets the rotation option
(Inherited from IMemberAttributeSetBase.) |
![]() | StartReleases |
Gets the start span releases
(Inherited from IMemberAttributeSetBase.) |
![]() | StructureSupportingSensitiveFinishes |
Gets a value indicating the structure supporting sensitive finishes
|
![]() | UserFlangeDepthLeft |
Gets the left flange depth if it has fixed dimensions (in [mm])
|
![]() | UserFlangeDepthRight |
Gets the right flange depth if it has fixed dimensions (in [mm])
|
![]() | UserFlangeLeft |
Gets a value indicating whether the left flange dimensions are fixed instead of being calculated from the neighbor distance and slab
|
![]() | UserFlangeRight |
Gets a value indicating whether the right flange dimensions are fixed instead of being calculated from the neighbor distance and slab
|
![]() | UserFlangeWidthLeft |
Gets the left flange width if it has fixed dimensions (in [mm])
|
![]() | UserFlangeWidthRight |
Gets the right flange width if it has fixed dimensions (in [mm])
|
