 | IReinforcementBar Properties |
The IReinforcementBar type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | A |
Gets the value of the A parameter (in [mm])
|
| B |
Gets the value of the B parameter (in [mm])
|
| BarGeometry |
Gets the bar geometry
|
| BobPosition |
Gets the position of bobs on this bar
|
| C |
Gets the value of the C parameter (in [mm])
|
| ContributesToArea |
Gets a value indicating whether the bar contributes to the provided area
|
| Curve |
Gets the composite curve of the bar
|
| D |
Gets the value of the D parameter (in [mm])
|
| Depth |
Gets the bar "depth" (distance of opposite ends; only valid for U-bars) (in [mm])
|
| Direction |
Gets the direction of the bar relative to the direction of the element it belongs to
|
| E |
Gets the value of the E parameter (in [mm])
|
| F |
Gets the value of the F parameter (in [mm])
|
| G |
Gets the value of the G parameter (in [mm])
|
| Geometry |
Gets the geometry of the reinforcement object
(Inherited from IReinforcement.) |
| H |
Gets the value of the H parameter (in [mm])
|
| HasAnchorage |
Gets a value indicating whether any anchorage lengths are defined for this bar
|
| HasLaps |
Gets a value indicating whether any lap lengths are defined for this bar
|
| Id |
Gets the unique ID of the bar
|
| IsMirroredHorizontally |
Gets a value indicating whether the bar shape is mirrored horizontally relative to its base position
|
| IsMirroredVertically |
Gets a value indicating whether the bar shape is mirrored vertically relative to its base position
|
| IsTrueUBar |
Gets a value indicating whether this bar is a true U-bar defined in both zones
|
| J |
Gets the value of the J parameter (in [mm])
|
| K |
Gets the value of the K parameter (in [mm])
|
| L |
Gets the value of the L parameter (in [mm])
|
| LayerIndex |
Gets the index of the layer the bar is placed in
|
| Length |
Gets the total length of the bar (along its centre line) (in [mm])
|
| LinearLength |
Gets the linear length of the bar (ie. the maximum extent along its direction) (in [mm])
|
| LinearLengthWithoutCranks |
Gets the linear length of the bar without cranks (in [mm])
|
| LinkTipLength |
Gets the length of the tips (hooks/extensions) of a link bar (in [mm])
|
| Location |
Gets the bar location in the section
|
| M |
Gets the value of the M parameter (in [mm])
|
| Mark |
Gets the object mark (an arbitrary number used in drawings)
(Inherited from IReinforcement.) |
| OppositeLayerIndex |
Gets the index of the layer the bar is placed in the opposite zone
|
| P |
Gets the value of the P parameter (depends on the bar diameter) (in [mm])
|
| P90Degrees |
Gets the value of the P parameter for bends with 90 degree angle (depends on the bar diameter) (in [mm])
|
| PShallowBend |
Gets the value of the P parameter for shallow bends (less than 150 degrees; depends on the bar diameter) (in [mm])
|
| R |
Gets the value of the R parameter (in [mm])
|
| RCalculated |
Gets the value of the R parameter (the bend radius; depends on the bar diameter) (in [mm])
|
| RotationAngle |
Gets the angle of the bar rotation (in [rad], measured counterclockwise)
|
| Shape |
Gets the shape of the reinforcement bar
|
| Size |
Gets the size of the reinforcement bar
|
| StartPosition |
Gets the start position of the bar relative to the bottom-left point of the start face of the start span
|
| StartSpanIndex |
Gets the index of the span in the parent object the reinforcement starts in
(Inherited from IReinforcement.) |
See Also