 | AnalysisModelHandler Methods |
The AnalysisModelHandler type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | AddLoad |
Adds a load to the analysis model.
The ConstructionMethod must be SELECTED_PARTS, SELECTED_PARTS_AND_LOADS or FLOOR_BY_SELECTED_PARTS_AND_LOADS.
|
| AddPart |
Adds a part to the analysis model.
The ConstructionMethod must be SELECTED_PARTS, SELECTED_PARTS_AND_LOADS or FLOOR_BY_SELECTED_PARTS_AND_LOADS.
|
| GetActiveModel |
Gets the active model.
|
| RemoveLoad |
Removes a load from the analysis model.
The ConstructionMethod must be SELECTED_PARTS, SELECTED_PARTS_AND_LOADS or FLOOR_BY_SELECTED_PARTS_AND_LOADS.
|
| RemovePart |
Removes a part from the analysis model.
The ConstructionMethod must be SELECTED_PARTS, SELECTED_PARTS_AND_LOADS or FLOOR_BY_SELECTED_PARTS_AND_LOADS.
|
| SetActiveModel |
Sets the active model.
The AnalysisModelName or ID has to be set.
|
See Also