 | PreferredMarkPlacingTypes Methods |
The PreferredMarkPlacingTypes type exposes the following members.
Methods| Name | Description | |
|---|---|---|
  | AlongLineOrWithLeaderLineAndParentObjectAlongPartPlacingType |
The object is placed using the along line placing as the first option.
If there is no room for the first option the fallback option will be used.
The fallback option is placing the object with a leader line and rotated to be at the same angle as the connected part.
|
| AlongLineOrWithLeaderLinePlacingType |
The object is placed using the along line placing as the first option.
If there is no room for the first option the fallback option will be used.
The fallback option is placing the object with a leader line.
|
| AlongLinePlacingType |
The object is placed using the along line placing.
|
| AlongPartCenteredPlacingType |
The object is placed using the along line placing.
The line used will be the part's edge in the center of that line.
|
| InsidePartAlongPartOrWithLeaderLinePlacingType |
The object is placed using the base line placing as the first option.
If there is no room for the first option the fallback option will be used.
The fallback option is placing the object with a leader line.
The base line used is in the middle of the part, aligned with the part.
|
| InsidePartAlongPartPlacingType |
The object is placed using the base line placing.
The base line used is in the middle of the part, aligned with the part.
|
| InsidePartHorizontalOrWithLeaderLinePlacingType |
The object is placed using the base line placing as the first option.
If there is no room for the first option the fallback option will be used.
The fallback option is placing the object with a leader line.
The base line used is in the middle of the part, aligned with the part.
In addition the object will be rotated to be horizontal in the drawing.
|
| InsidePartHorizontalPlacingType |
The object is placed using the base line placing.
The base line used is in the middle of the part, aligned with the part.
In addition the object will be rotated to be horizontal in the drawing.
|
| LeaderLineAndParentObjectAlongPartPlacingType |
The object is placed with a leader line and rotated to be at the same angle as the connected part.
|
| LeaderLinePlacingType |
The object is placed with a leader line.
|
| PointPlacingType |
The object is placed at one point (the insertion point) without any additional placing options.
|
See Also