 | BoltGroup Properties |
The BoltGroup type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | BlindHoleDepth |
Gets or sets the blind hole depth.
|
| Bolt |
Indicates whether the instance is a bolt or just a hole.
|
| BoltHolesAttributes |
The bolt holes attributes.
|
| BoltPositions |
Gets the single bolt positions.
All the bolt positions are in the XY-plane defined by the bolt group coordinate
system. The given positions are in relation to the transformation plane
in which the bolt group was selected.
|
| BoltSize |
The size of the bolts in the group.
|
| BoltStandard |
The standard of the bolt group.
|
| BoltType |
The type of the bolt group.
|
| ConnectAssemblies | Defines whether to connect a part or an assembly as a secondary part (false) or as a sub-assembly (true). |
| CutLength |
The cut length.
|
| EndPointOffset |
The end point offset values of the bolt group.
|
| ExtraLength |
The extra length for the bolts.
|
| FirstPosition |
The first position point.
|
| Hole1 |
Indicates whether the hole 1 is used.
|
| Hole2 |
Indicates whether the hole 2 is used.
|
| Hole3 |
Indicates whether the hole 3 is used.
|
| Hole4 |
Indicates whether the hole 4 is used.
|
| Hole5 |
Indicates whether the hole 5 is used.
|
| HoleType |
The special hole type: oversized, slotted, blind or no hole.
|
| Identifier |
The identifier of the object.
(Inherited from Object.) |
| IsUpToDate | Gets if the object does not have a modification which is not shared. (Inherited from ModelObject.) |
| Length |
The length. An extra variable that is only set when the bolt group is made of studs instead of bolts.
|
| ModificationTime | Gets latest time of the object was modified or created. (Inherited from ModelObject.) |
| Nut1 |
Indicates whether the nut 1 is used in the assembly.
|
| Nut2 |
Indicates whether the nut 2 is used in the assembly.
|
| OtherPartsToBolt |
The other parts to be bolted (read-only).
|
| PartToBeBolted |
The part to be bolted.
|
| PartToBoltTo |
The part to bolt to.
|
| PlainHoleType |
Gets or sets the plain hole type.
|
| Position |
The position attributes.
|
| RotateSlots |
Gets or sets the rotation of the slots: odd, even or parallel.
|
| SecondPosition |
The second position point.
|
| SlotOffsetX |
Gets or sets the slotted hole offset X.
|
| SlotOffsetY |
Gets or sets the slotted hole offset Y.
|
| SlottedHoleX |
Gets or sets the X allowance of the slotted hole.
|
| SlottedHoleY |
Gets or sets the Y allowance of the slotted hole.
|
| StartPointOffset |
The start point offset values of the bolt group.
|
| ThreadInMaterial |
Whether the thread goes inside the materal or not.
|
| Tolerance |
The hole tolerance.
|
| Washer1 |
Indicates whether the washer 1 is used in the assembly.
|
| Washer2 |
Indicates whether the washer 2 is used in the assembly.
|
| Washer3 |
Indicates whether the washer 3 is used in the assembly.
|
See Also