 | AnalysisResultLoadCaseForMinMaxEnum Enumeration |
Special load case numbers for min/max queries.
Namespace: Tekla.Structures.Analysis
Assembly: Tekla.Structures.Analysis (in Tekla.Structures.Analysis.dll) Version: 2024.0.0+a110b435391768740483e3032720a566518c9a63
SyntaxMembers| Member name | Value | Description | |
|---|---|---|---|
| LOADCASE_WITH_MIN_VALUE | -1 | The load case with the minimum signed value of the queried value type. | |
| LOADCASE_WITH_MAX_VALUE | -2 | The load case with the maximum signed value of the queried value type. | |
| LOADCASE_WITH_MAX_ABSOLUTE_VALUE | -3 | The load case with the maximum absolute value of the queried value type. | |
| LOADCASE_WITH_MAX_FX_VALUE | -11 | The load case with the maximum axial (FX) value. | |
| LOADCASE_WITH_MIN_FX_VALUE | -12 | The load case with the minimum axial (FX) value. | |
| LOADCASE_WITH_MAX_FY_VALUE | -13 | The load case with the maximum shear Y (FY) value. | |
| LOADCASE_WITH_MIN_FY_VALUE | -14 | The load case with the minimum shear Y (FY) value. | |
| LOADCASE_WITH_MAX_FZ_VALUE | -15 | The load case with the maximum shear Z (FZ) value. | |
| LOADCASE_WITH_MIN_FZ_VALUE | -16 | The load case with the minimum shear Z (FZ) value. | |
| LOADCASE_WITH_MAX_MX_VALUE | -17 | The load case with the maximum torsional moment (MX) value. | |
| LOADCASE_WITH_MIN_MX_VALUE | -18 | The load case with the minimum torsional moment (MX) value. | |
| LOADCASE_WITH_MAX_MY_VALUE | -19 | The load case with the maximum bending moment Y (MY) value. | |
| LOADCASE_WITH_MIN_MY_VALUE | -20 | The load case with the minimum bending moment Y (MY) value. | |
| LOADCASE_WITH_MAX_MZ_VALUE | -21 | The load case with the maximum bending moment Z (MZ) value. | |
| LOADCASE_WITH_MIN_MZ_VALUE | -22 | The load case with the minimum bending moment Z (MZ) value. |
Examples
Get the value from the load case with the maximum absolute value (whether positive or negative).
AnalysisResult.LoadCase = (int)AnalysisResult.LoadCaseForMinMaxEnum.LOADCASE_WITH_MAX_ABSOLUTE_VALUE;Examples
Get the shear value from the load case with the minimum axial force value.
AnalysisResult.ValueType = AnalysisResult.ValueTypeEnum.VALUETYPE_SHEAR_Y;
AnalysisResult.LoadCase = (int)AnalysisResult.LoadCaseForMinMaxEnum.LOADCASE_WITH_MIN_FX_VALUE;See Also