AnalysisModelOutputProperties Properties

The AnalysisModelOutputProperties type exposes the following members.

Properties

	Name	Description
	OutputAnalysisResults	Indicates whether the analysis results are created.
	OutputElementForces	Indicates whether the element forces are created.
	OutputElementInformation	Indicates whether the element information is created.
	OutputElementJointStresses	Indicates whether the element joint stresses are created.
	OutputElementJointStressesSolid	Indicates whether the element joint stresses solid is created.
	OutputEntireSteelTable	Indicates whether the entire steel table is created.
	OutputJointCoordinates	Indicates whether the joint coordinates are created.
	OutputJointDisplacements	Indicates whether the joint displacements are created.
	OutputMaterialProperties	Indicates whether the material properties are created.
	OutputMemberForces	Indicates whether the member forces are created.
	OutputMemberInformation	Indicates whether the member information is created.
	OutputMemberProperties	Indicates whether the member properties are created.
	OutputMemberSectionForces	Indicates whether the member section forces are created.
	OutputMemberStresses	Indicates whether the member stresses are created.
	OutputModeShapes	Indicates whether the mode shapes are created.
	OutputStoryDrift	Indicates whether the story drift is created.
	OutputSupportInformation	Indicates whether the support information is created.
	OutputSupportReactions	Indicates whether the supported reactions are created.