Weld Properties

The Weld type exposes the following members.

Properties
  NameDescription
Public propertyAdditionalSizeAbove
Gets or sets the additional size above for combination welds.
(Inherited from BaseWeld.)
Public propertyAdditionalSizeBelow
Gets or sets the additional size below for combination welds.
(Inherited from BaseWeld.)
Public propertyAngleAbove
Gets or sets the angle above.
(Inherited from BaseWeld.)
Public propertyAngleBelow
Gets or sets the angle below.
(Inherited from BaseWeld.)
Public propertyAroundWeld
Gets or sets a value indicating whether the weld is an around weld (true) or an edge weld (false).
(Inherited from BaseWeld.)
Public propertyConnectAssemblies
Gets or sets a value indicating whether to connect a part or an assembly as a secondary part (false) or as a sub-assembly (true).
(Inherited from BaseWeld.)
Public propertyContourAbove
Gets or sets the contour above.
(Inherited from BaseWeld.)
Public propertyContourBelow
Gets or sets the contour below.
(Inherited from BaseWeld.)
Public propertyDirection
Defines the Weld edge search direction normalized to length 1000.0. Overrides Position if set.
Public propertyEffectiveThroatAbove
Gets or sets the effective throat above.
(Inherited from BaseWeld.)
Public propertyEffectiveThroatBelow
Gets or sets the effective throat below.
(Inherited from BaseWeld.)
Public propertyElectrodeClassification
Gets or sets the weld electrode classification.
(Inherited from BaseWeld.)
Public propertyElectrodeCoefficient
Gets or sets the electrode strength coefficient.
(Inherited from BaseWeld.)
Public propertyElectrodeStrength
Gets or sets the electrode strength.
(Inherited from BaseWeld.)
Public propertyFinishAbove
Gets or sets the finish above.
(Inherited from BaseWeld.)
Public propertyFinishBelow
Gets or sets the finish below.
(Inherited from BaseWeld.)
Public propertyIdentifier
The identifier of the object.
(Inherited from Object.)
Public propertyIncrementAmountAbove
Gets or sets the increment amount above.
(Inherited from BaseWeld.)
Public propertyIncrementAmountBelow
Gets or sets the increment amount below.
(Inherited from BaseWeld.)
Public propertyIntermittentType
Gets or sets the weld intermittent type.
(Inherited from BaseWeld.)
Public propertyIsUpToDate
Gets if the object does not have a modification which is not shared.
(Inherited from ModelObject.)
Public propertyLengthAbove
Gets or sets the length above.
(Inherited from BaseWeld.)
Public propertyLengthBelow
Gets or sets the length below.
(Inherited from BaseWeld.)
Public propertyMainObject
Gets or sets the main part of the weld.
(Inherited from BaseWeld.)
Public propertyModificationTime
Gets latest time of the object was modified or created.
(Inherited from ModelObject.)
Public propertyNDTInspection
Gets or sets the NDT inspection level.
(Inherited from BaseWeld.)
Public propertyPitchAbove
Gets or sets the pitch above.
(Inherited from BaseWeld.)
Public propertyPitchBelow
Gets or sets the pitch below.
(Inherited from BaseWeld.)
Public propertyPlacement
Gets or sets the weld placement.
(Inherited from BaseWeld.)
Public propertyPosition
Defines the position. Use of Direction is preferred over this.
Public propertyPrefixAboveLine
Gets or sets the size prefix above the line.
(Inherited from BaseWeld.)
Public propertyPrefixBelowLine
Gets or sets the size prefix below the line.
(Inherited from BaseWeld.)
Public propertyPreparation
Gets or sets the weld preparation.
(Inherited from BaseWeld.)
Public propertyProcessType
Gets or sets the process type.
(Inherited from BaseWeld.)
Public propertyReferenceText
Gets or sets the reference text.
(Inherited from BaseWeld.)
Public propertyRootFaceAbove
Gets or sets the root face above.
(Inherited from BaseWeld.)
Public propertyRootFaceBelow
Gets or sets the root face below.
(Inherited from BaseWeld.)
Public propertyRootOpeningAbove
Gets or sets the root opening above.
(Inherited from BaseWeld.)
Public propertyRootOpeningBelow
Gets or sets the root opening below.
(Inherited from BaseWeld.)
Public propertySecondaryObject
Gets or sets the secondary part of the weld.
(Inherited from BaseWeld.)
Public propertyShopWeld
Gets or sets a value indicating whether the weld is a shop weld (true) or a site weld (false).
(Inherited from BaseWeld.)
Public propertySizeAbove
Gets or sets the size above.
(Inherited from BaseWeld.)
Public propertySizeBelow
Gets or sets the size below.
(Inherited from BaseWeld.)
Public propertyStandard Obsolete.
Gets or sets the weld detail/standard.
(Inherited from BaseWeld.)
Public propertyStitchWeld Obsolete.
Gets or sets a value indicating whether the weld is stitched (true) or not stitched (false).
(Inherited from BaseWeld.)
Public propertyTypeAbove
Gets or sets the type above.
(Inherited from BaseWeld.)
Public propertyTypeBelow
Gets or sets the type below.
(Inherited from BaseWeld.)
Public propertyWeldNumber
Gets the weld number.
(Inherited from BaseWeld.)
Public propertyWeldNumberPrefix
Gets or sets the weld number prefix.
(Inherited from BaseWeld.)
Top
See Also
Was this helpful?
The feedback you give here is not visible to other users. We use your comments to improve the content.
Previous
Next