BoltXYList Properties |
The BoltXYList type exposes the following members.
Properties
Name | Description | |
---|---|---|
BlindHoleDepth |
Gets or sets the blind hole depth.
(Inherited from BoltGroup.) | |
Bolt |
Indicates whether the instance is a bolt or just a hole.
(Inherited from BoltGroup.) | |
BoltHolesAttributes |
The bolt holes attributes.
(Inherited from BoltGroup.) | |
BoltPositions |
Gets the single bolt positions.
All the bolt positions are in the XY-plane defined by the bolt group coordinate
system. The given positions are in relation to the transformation plane
in which the bolt group was selected.
(Inherited from BoltGroup.) | |
BoltSize |
The size of the bolts in the group.
(Inherited from BoltGroup.) | |
BoltStandard |
The standard of the bolt group.
(Inherited from BoltGroup.) | |
BoltType |
The type of the bolt group.
(Inherited from BoltGroup.) | |
ConnectAssemblies | Defines whether to connect a part or an assembly as a secondary part (false) or as a sub-assembly (true). (Inherited from BoltGroup.) | |
CutLength |
The cut length.
(Inherited from BoltGroup.) | |
EndPointOffset |
The end point offset values of the bolt group.
(Inherited from BoltGroup.) | |
ExtraLength |
The extra length for the bolts.
(Inherited from BoltGroup.) | |
FirstPosition |
The first position point.
(Inherited from BoltGroup.) | |
Hole1 |
Indicates whether the hole 1 is used.
(Inherited from BoltGroup.) | |
Hole2 |
Indicates whether the hole 2 is used.
(Inherited from BoltGroup.) | |
Hole3 |
Indicates whether the hole 3 is used.
(Inherited from BoltGroup.) | |
Hole4 |
Indicates whether the hole 4 is used.
(Inherited from BoltGroup.) | |
Hole5 |
Indicates whether the hole 5 is used.
(Inherited from BoltGroup.) | |
HoleType |
The special hole type: oversized, slotted, blind or no hole.
(Inherited from BoltGroup.) | |
Identifier |
The identifier of the object.
(Inherited from Object.) | |
IsUpToDate | Gets if the object does not have a modification which is not shared. (Inherited from ModelObject.) | |
Length |
The length. An extra variable that is only set when the bolt group is made of studs instead of bolts.
(Inherited from BoltGroup.) | |
ModificationTime | Gets latest time of the object was modified or created. (Inherited from ModelObject.) | |
Nut1 |
Indicates whether the nut 1 is used in the assembly.
(Inherited from BoltGroup.) | |
Nut2 |
Indicates whether the nut 2 is used in the assembly.
(Inherited from BoltGroup.) | |
OtherPartsToBolt |
The other parts to be bolted (read-only).
(Inherited from BoltGroup.) | |
PartToBeBolted |
The part to be bolted.
(Inherited from BoltGroup.) | |
PartToBoltTo |
The part to bolt to.
(Inherited from BoltGroup.) | |
PlainHoleType |
Gets or sets the plain hole type.
(Inherited from BoltGroup.) | |
Position |
The position attributes.
(Inherited from BoltGroup.) | |
RotateSlots |
Gets or sets the rotation of the slots: odd, even or parallel.
(Inherited from BoltGroup.) | |
SecondPosition |
The second position point.
(Inherited from BoltGroup.) | |
SlotOffsetX |
Gets or sets the slotted hole offset X.
(Inherited from BoltGroup.) | |
SlotOffsetY |
Gets or sets the slotted hole offset Y.
(Inherited from BoltGroup.) | |
SlottedHoleX |
Gets or sets the X allowance of the slotted hole.
(Inherited from BoltGroup.) | |
SlottedHoleY |
Gets or sets the Y allowance of the slotted hole.
(Inherited from BoltGroup.) | |
StartPointOffset |
The start point offset values of the bolt group.
(Inherited from BoltGroup.) | |
ThreadInMaterial |
Whether the thread goes inside the materal or not.
(Inherited from BoltGroup.) | |
Tolerance |
The hole tolerance.
(Inherited from BoltGroup.) | |
Washer1 |
Indicates whether the washer 1 is used in the assembly.
(Inherited from BoltGroup.) | |
Washer2 |
Indicates whether the washer 2 is used in the assembly.
(Inherited from BoltGroup.) | |
Washer3 |
Indicates whether the washer 3 is used in the assembly.
(Inherited from BoltGroup.) |
See Also