BoltArray Properties

The BoltArray type exposes the following members.

Properties
  NameDescription
Public propertyBlindHoleDepth
Gets or sets the blind hole depth.
(Inherited from BoltGroup.)
Public propertyBolt
Indicates whether the instance is a bolt or just a hole.
(Inherited from BoltGroup.)
Public propertyBoltHolesAttributes
The bolt holes attributes.
(Inherited from BoltGroup.)
Public propertyBoltPositions
Gets the single bolt positions. All the bolt positions are in the XY-plane defined by the bolt group coordinate system. The given positions are in relation to the transformation plane in which the bolt group was selected.
(Inherited from BoltGroup.)
Public propertyBoltSize
The size of the bolts in the group.
(Inherited from BoltGroup.)
Public propertyBoltStandard
The standard of the bolt group.
(Inherited from BoltGroup.)
Public propertyBoltType
The type of the bolt group.
(Inherited from BoltGroup.)
Public propertyConnectAssemblies
Defines whether to connect a part or an assembly as a secondary part (false) or as a sub-assembly (true).
(Inherited from BoltGroup.)
Public propertyCutLength
The cut length.
(Inherited from BoltGroup.)
Public propertyEndPointOffset
The end point offset values of the bolt group.
(Inherited from BoltGroup.)
Public propertyExtraLength
The extra length for the bolts.
(Inherited from BoltGroup.)
Public propertyFirstPosition
The first position point.
(Inherited from BoltGroup.)
Public propertyHole1
Indicates whether the hole 1 is used.
(Inherited from BoltGroup.)
Public propertyHole2
Indicates whether the hole 2 is used.
(Inherited from BoltGroup.)
Public propertyHole3
Indicates whether the hole 3 is used.
(Inherited from BoltGroup.)
Public propertyHole4
Indicates whether the hole 4 is used.
(Inherited from BoltGroup.)
Public propertyHole5
Indicates whether the hole 5 is used.
(Inherited from BoltGroup.)
Public propertyHoleType
The special hole type: oversized, slotted, blind or no hole.
(Inherited from BoltGroup.)
Public propertyIdentifier
The identifier of the object.
(Inherited from Object.)
Public propertyIsUpToDate
Gets if the object does not have a modification which is not shared.
(Inherited from ModelObject.)
Public propertyLength
The length. An extra variable that is only set when the bolt group is made of studs instead of bolts.
(Inherited from BoltGroup.)
Public propertyModificationTime
Gets latest time of the object was modified or created.
(Inherited from ModelObject.)
Public propertyNut1
Indicates whether the nut 1 is used in the assembly.
(Inherited from BoltGroup.)
Public propertyNut2
Indicates whether the nut 2 is used in the assembly.
(Inherited from BoltGroup.)
Public propertyOtherPartsToBolt
The other parts to be bolted (read-only).
(Inherited from BoltGroup.)
Public propertyPartToBeBolted
The part to be bolted.
(Inherited from BoltGroup.)
Public propertyPartToBoltTo
The part to bolt to.
(Inherited from BoltGroup.)
Public propertyPlainHoleType
Gets or sets the plain hole type.
(Inherited from BoltGroup.)
Public propertyPosition
The position attributes.
(Inherited from BoltGroup.)
Public propertyRotateSlots
Gets or sets the rotation of the slots: odd, even or parallel.
(Inherited from BoltGroup.)
Public propertySecondPosition
The second position point.
(Inherited from BoltGroup.)
Public propertySlotOffsetX
Gets or sets the slotted hole offset X.
(Inherited from BoltGroup.)
Public propertySlotOffsetY
Gets or sets the slotted hole offset Y.
(Inherited from BoltGroup.)
Public propertySlottedHoleX
Gets or sets the X allowance of the slotted hole.
(Inherited from BoltGroup.)
Public propertySlottedHoleY
Gets or sets the Y allowance of the slotted hole.
(Inherited from BoltGroup.)
Public propertyStartPointOffset
The start point offset values of the bolt group.
(Inherited from BoltGroup.)
Public propertyThreadInMaterial
Whether the thread goes inside the materal or not.
(Inherited from BoltGroup.)
Public propertyTolerance
The hole tolerance.
(Inherited from BoltGroup.)
Public propertyWasher1
Indicates whether the washer 1 is used in the assembly.
(Inherited from BoltGroup.)
Public propertyWasher2
Indicates whether the washer 2 is used in the assembly.
(Inherited from BoltGroup.)
Public propertyWasher3
Indicates whether the washer 3 is used in the assembly.
(Inherited from BoltGroup.)
Top
See Also
Was this helpful?
The feedback you give here is not visible to other users. We use your comments to improve the content.
Previous
Next