Interface IHaunch
Represents a haunch
Namespace: TSD.API.Remoting.Structure
Assembly: TSD.API.Remoting.dll
Syntax
public interface IHaunchProperties
| Name | Description |
|---|---|
| BuiltUpPlateFlangeThickness | Gets the built-up plate flange thickness |
| BuiltUpPlateFlangeWidth | Gets the built-up plate flange width |
| BuiltUpPlateWebThickness | Gets the built-up plate web thickness |
| CutSection | Gets the cut section |
| CutType | Gets the type of the haunch cut |
| CutWidth | Gets the width of the haunch cut (in [mm]) |
| Depth | Gets the depth, Dh (in [mm]) |
| DepthOption | Gets the haunch depth option |
| EndPlate | Gets the end plate |
| Fabrication | Gets the fabrication |
| FlangePosition | Gets the flange position the haunch is attached to |
| Gamma | Gets the value of Gamma (in [rad]) |
| Length | Gets the length, Lh (in [mm]) |
| MaxCutDepth | Gets the maximum cut depth (in [mm]) |
| MaxCutDepthKnown | Gets a value indicating whether the maximum cut depth can be calculated |
| MemberSpanEnd | Gets the end of the member span the haunch is attached to |
| MemberSpanInfo | Gets the info of the member span the haunch is attached to |
| Offset1 | Gets the value of offset 1 (in [mm]) |
| Offset2 | Gets the value of offset 2 (in [mm]) |
| PortalFrameRafterPosition | Gets the position of the rafter the haunch is attached to |
| SectionDerivation | Gets the derivation of the haunch section |
| Steel | Gets the steel |