Interface IIsolatedFoundationData
Represents additional data of isolated foundation
Namespace: TSD.API.Remoting.Foundations
Assembly: TSD.API.Remoting.dll
Syntax
public interface IIsolatedFoundationDataProperties
| Name | Description |
|---|---|
| AutoDesignDepth | Gets a value indicating whether to auto-design the depth |
| AutoDesignOptionDimensions | Gets the dimensions auto-design option |
| AutoDesignOptionReinforcement | Gets the reinforcement auto-design option |
| AutoDesignReinforcement | Gets a value indicating whether to auto-design the reinforcement |
| AutoDesignSize | Gets a value indicating whether to auto-design the size |
| BottomCover | Gets the bottom cover (in [mm]) |
| Concrete | Gets the concrete |
| Contour | Gets the polygon |
| Depth | Gets the depth (in [mm]) |
| DesignShearStrengthOfSoilAngle | Gets the angle of the design shear strength of the soil (in [rad]) |
| EccentricityDir1 | Gets the eccentricity in direction 1 (in [mm]) |
| EccentricityDir2 | Gets the eccentricity in direction 2 (in [mm]) |
| EntityType | Gets the entity type |
| ExtensionBeyondWall | Gets the extension beyond the wall (in [mm]) |
| FoundationType | Gets the foundation type |
| FrictionAngle | Gets the angle of the friction (in [rad]) |
| IsolatedFoundationGeometry | Gets the geometry of this isolated foundation |
| IsolatedFoundationShape | Gets the shape of this isolated foundation |
| LengthDir1 | Gets the length in direction 1 (in [mm]) |
| LengthDir2 | Gets the length in direction 2 (in [mm]) |
| MaximumCrackWidth | Gets the maximum crack width (in [mm]) |
| PedestalHeight | Gets the pedestal height (in [mm]) |
| PedestalLengthDir1 | Gets the pedestal length in direction 1 (in [mm]) |
| PedestalLengthDir2 | Gets the pedestal length in direction 2 (in [mm]) |
| PermanentLoadRatioOption | Gets the permanent load ratio option |
| Rotation | Gets the rotation (in [rad]) |
| SideCover | Gets the side cover (in [mm]) |
| SoilUnitWeight | Gets the soil unit weight (in [N/mm²]) |
| StepHeight | Gets the step height (in [mm]) |
| StepLengthDir1 | Gets the step length in direction 1 (in [mm]) |
| StepLengthDir2 | Gets the step length in direction 2 (in [mm]) |
| SupportedMemberType | Gets the type of the supported member |
| SurchargeDepth | Gets the surcharge depth (in [mm]) |
| SurchargeLoadPermanent | Gets the surcharge permanent load (in [N/mm²]) |
| SurchargeLoadVariable | Gets the surcharge variable load (in [N/mm²]) |
| SurfaceArea | Gets the surface area of the foundation (in [mm²]) |
| TaperHeight | Gets the taper height (in [mm]) |
| TaperLengthDir1 | Gets the taper length in direction 1 (in [mm]) |
| TaperLengthDir2 | Gets the taper length in direction 2 (in [mm]) |
| TopCover | Gets the top cover (in [mm]) |
| UseUserLoadedArea | Gets a value indicating whether to use the user loaded area |
| UserLoadedAreaBreadth | Gets the breadth of the user loaded area (in [mm]) |
| UserLoadedAreaDepth | Gets the depth of the user loaded area (in [mm]) |
| UserPermanentLoadRatio | Gets the user permanent load ratio |
| UtilizationRatioLimit | Gets the utilization ratio limit |
| Volume | Gets the volume of the foundation (in [mm³]) |