![]() | IWestok |
The IWestokCircularWebOpening type exposes the following members.

Name | Description | |
---|---|---|
![]() | CenterToStartPoint |
Gets the distance from the member's start point to the center of the opening (in [mm])
(Inherited from IWebOpening) |
![]() | CenterToTopSide |
Gets the distance from the top side of the member to the center of the opening (in [mm])
(Inherited from IWebOpening) |
![]() | Diameter |
Gets the diameter (in [mm])
(Inherited from ICircularWebOpening) |
![]() | EdgeToStiffenerCenter | Obsolete. Gets the distance from edge of the opening to the center of the stiffener (in [mm]) (Inherited from IWebOpening) |
![]() | InfillSteel |
Gets the steel used for the infill
(Inherited from IWestokWebOpening) |
![]() | InfillType |
Gets the type of the infill
(Inherited from IWestokWebOpening) |
![]() | InfillWidth |
Gets the width of the infill (in [mm])
(Inherited from IWestokWebOpening) |
![]() | IsStiffened |
Gets a value indicating whether there are stiffeners on the sides of the opening
(Inherited from IWebOpening) |
![]() | Shape |
Gets the shape of the web opening
(Inherited from IWebOpening) |
![]() | Stiffener |
Gets the stiffener
(Inherited from IWebOpening) |
![]() | StiffenerDepth | Obsolete. Gets the depth of the stiffener (in [mm]) (Inherited from IWebOpening) |
![]() | StiffenerLength | Obsolete. Gets the length of the stiffener (in [mm]) (Inherited from IWebOpening) |
![]() | StiffenerThickness | Obsolete. Gets the thickness of the stiffener (in [mm]) (Inherited from IWebOpening) |
![]() | Stiffening | Obsolete. Gets the stiffening of the opening (Inherited from IWebOpening) |
