 | ISquare |
The ISquareHollowSection type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Breadth | Gets the breadth (in [mm]) |
| Country |
Gets the country this section belongs to
(Inherited from INonParametricSection) |
| CrossSectionalArea |
Gets the cross sectional area (in [mm²])
(Inherited from ISection) |
| Depth | Gets the depth (in [mm]) |
| ElasticSectionModulus | Gets the elastic section modulus (in [mm³]) |
| HeadCode |
Gets the head code this section belongs to
(Inherited from INonParametricSection) |
| LengthPerUnitMass | Gets the length per unit mass (in [mm/kg]) |
| LongName |
Gets the long name of the section
(Inherited from ISection) |
| MajorAxisElasticSectionModulus | Gets the major axis elastic section modulus (in [mm⁴]) |
| MajorAxisPlasticSectionModulus | Gets the major axis plastic section modulus (in [mm⁴]) |
| MajorAxisRadiusOfGyration | Gets the major axis radius of gyration (in [mm]) |
| MajorAxisSecondMomentOfArea |
Gets the major axis second moment of area (in [mm⁴])
(Inherited from ISection) |
| Mass | Gets the mass per unit length (in [kg/mm]) |
| MaterialType |
Gets the material type
(Inherited from ISection) |
| MinorAxisElasticSectionModulus | Gets the minor axis elastic section modulus (in [mm⁴]) |
| MinorAxisPlasticSectionModulus | Gets the minor axis plastic section modulus (in [mm⁴]) |
| MinorAxisRadiusOfGyration | Gets the minor axis radius of gyration (in [mm]) |
| MinorAxisSecondMomentOfArea |
Gets the minor axis second moment of area (in [mm⁴])
(Inherited from ISection) |
| PlasticSectionModulus | Gets the plastic section modulus (in [mm³]) |
| RadiusOfGyration | Gets the radius of gyration (in [mm]) |
| SecondMomentOfArea | Gets the second moment of area (in [mm⁴]) |
| SectionGeometry |
Gets the section geometry
(Inherited from ISection) |
| SectionGroup |
Gets the section group
(Inherited from INonParametricSection) |
| SectionType |
Gets the section type
(Inherited from INonParametricSection) |
| ShearAreaLoadedParallelToMajorAxis |
Gets the shear area loaded parallel to major axis (in [mm²])
(Inherited from ISection) |
| ShearAreaLoadedParallelToMinorAxis |
Gets the shear area loaded parallel to minor axis (in [mm²])
(Inherited from ISection) |
| ShortName |
Gets the short name of the section
(Inherited from ISection) |
| SurfaceAreaPerUnitLength | Gets the surface area per unit length (in [mm²/mm]) |
| TorsionConstant |
Gets the torsion constant (in [mm⁴])
(Inherited from ISection) |
| TorsionModulusConstant | Gets the torsion modulus constant (in [mm³]) |
| UnitSystem |
Gets the unit system this section is defined in
(Inherited from INonParametricSection) |
| WallThickness | Gets the wall thickness (in [mm]) |
See Also