 | IPlated |
The IPlatedISection type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | BottomFlangeBreadth | Gets the breadth of the bottom flange (in [mm]) |
| BottomFlangeThickness | Gets the thickness of the bottom flange (in [mm]) |
| BucklingParameter | Gets the buckling parameter (unitless) |
| Country |
Gets the country this section belongs to
(Inherited from INonParametricSection) |
| CrossSectionalArea |
Gets the cross sectional area (in [mm²])
(Inherited from ISection) |
| Depth | Gets the depth (in [mm]) |
| DepthOfWebBetweenFlanges | Gets the depth of web between flanges (in [mm]) |
| DepthToThicknessRatio | Gets the depth to thickness ratio (unitless) |
| DimensionFromTopOfSectionToElasticNeutralAxis | Gets the dimension from top of section to elastic neutral axis (in [mm]) |
| HeadCode |
Gets the head code this section belongs to
(Inherited from INonParametricSection) |
| LongName |
Gets the long name of the section
(Inherited from ISection) |
| MajorAxisElasticSectionModulus | Gets the major axis elastic section modulus (in [mm⁴]) |
| MajorAxisPlasticSectionModulus | Gets the major axis plastic section modulus (in [mm⁴]) |
| MajorAxisRadiusOfGyration | Gets the major axis radius of gyration (in [mm]) |
| MajorAxisSecondMomentOfArea |
Gets the major axis second moment of area (in [mm⁴])
(Inherited from ISection) |
| Mass | Gets the mass per unit length (in [kg/mm]) |
| MaterialType |
Gets the material type
(Inherited from ISection) |
| MinorAxisElasticSectionModulus | Gets the minor axis elastic section modulus (in [mm⁴]) |
| MinorAxisPlasticSectionModulus | Gets the minor axis plastic section modulus (in [mm⁴]) |
| MinorAxisRadiusOfGyration | Gets the minor axis radius of gyration (in [mm]) |
| MinorAxisSecondMomentOfArea |
Gets the minor axis second moment of area (in [mm⁴])
(Inherited from ISection) |
| SectionGeometry |
Gets the section geometry
(Inherited from ISection) |
| SectionGroup |
Gets the section group
(Inherited from INonParametricSection) |
| SectionType |
Gets the section type
(Inherited from INonParametricSection) |
| ShearAreaLoadedParallelToMajorAxis |
Gets the shear area loaded parallel to major axis (in [mm²])
(Inherited from ISection) |
| ShearAreaLoadedParallelToMinorAxis |
Gets the shear area loaded parallel to minor axis (in [mm²])
(Inherited from ISection) |
| ShortName |
Gets the short name of the section
(Inherited from ISection) |
| SurfaceAreaPerUnitLength | Gets the surface area per unit length (in [mm²/mm]) |
| SurfaceAreaPerUnitMass | Gets the surface area per unit mass (in [mm²/kg]) |
| TopFlangeBreadth | Gets the breadth of the top flange (in [mm]) |
| TopFlangeThickness | Gets the thickness of the top flange (in [mm]) |
| TorsionalIndex | Gets the torsional index (unitless) |
| TorsionConstant |
Gets the torsion constant (in [mm⁴])
(Inherited from ISection) |
| UnitSystem |
Gets the unit system this section is defined in
(Inherited from INonParametricSection) |
| WarpingConstant | Gets the warping constant (in [mm⁶]) |
| WebThickness | Gets the web thickness (in [mm]) |
See Also