 | IReinforcement |
The IReinforcementBar type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | A | Gets the value of the A parameter (in [mm]) |
| B | Gets the value of the B parameter (in [mm]) |
| BarGeometry | Gets the bar geometry |
| BobPosition | Gets the position of bobs on this bar |
| C | Gets the value of the C parameter (in [mm]) |
| ContributesToArea | Gets a value indicating whether the bar contributes to the provided area |
| Curve | Gets the composite curve of the bar |
| D | Gets the value of the D parameter (in [mm]) |
| Depth | Gets the bar "depth" (distance of opposite ends; only valid for U-bars) (in [mm]) |
| Direction | Gets the direction of the bar relative to the direction of the element it belongs to |
| E | Gets the value of the E parameter (in [mm]) |
| F | Gets the value of the F parameter (in [mm]) |
| G | Gets the value of the G parameter (in [mm]) |
| Geometry |
Gets the geometry of the reinforcement object
(Inherited from IReinforcement) |
| H | Gets the value of the H parameter (in [mm]) |
| HasAnchorage | Gets a value indicating whether any anchorage lengths are defined for this bar |
| HasLaps | Gets a value indicating whether any lap lengths are defined for this bar |
| Id | Gets the unique ID of the bar |
| IsMirroredHorizontally | Gets a value indicating whether the bar shape is mirrored horizontally relative to its base position |
| IsMirroredVertically | Gets a value indicating whether the bar shape is mirrored vertically relative to its base position |
| IsTrueUBar | Gets a value indicating whether this bar is a true U-bar defined in both zones |
| J | Gets the value of the J parameter (in [mm]) |
| K | Gets the value of the K parameter (in [mm]) |
| L | Gets the value of the L parameter (in [mm]) |
| LayerIndex | Gets the index of the layer the bar is placed in |
| Length | Gets the total length of the bar (along its centre line) (in [mm]) |
| LinearLength | Gets the linear length of the bar (ie. the maximum extent along its direction) (in [mm]) |
| LinearLengthWithoutCranks | Gets the linear length of the bar without cranks (in [mm]) |
| LinkTipLength | Gets the length of the tips (hooks/extensions) of a link bar (in [mm]) |
| Location | Gets the bar location in the section |
| M | Gets the value of the M parameter (in [mm]) |
| Mark |
Gets the object mark (an arbitrary number used in drawings)
(Inherited from IReinforcement) |
| OppositeLayerIndex | Gets the index of the layer the bar is placed in the opposite zone |
| P | Gets the value of the P parameter (depends on the bar diameter) (in [mm]) |
| P90Degrees | Gets the value of the P parameter for bends with 90 degree angle (depends on the bar diameter) (in [mm]) |
| PShallowBend | Gets the value of the P parameter for shallow bends (less than 150 degrees; depends on the bar diameter) (in [mm]) |
| R | Gets the value of the R parameter (in [mm]) |
| RCalculated | Gets the value of the R parameter (the bend radius; depends on the bar diameter) (in [mm]) |
| RotationAngle | Gets the angle of the bar rotation (in [rad], measured counterclockwise) |
| Shape | Gets the shape of the reinforcement bar |
| Size | Gets the size of the reinforcement bar |
| StartPosition | Gets the start position of the bar relative to the bottom-left point of the start face of the start span |
| StartSpanIndex |
Gets the index of the span in the parent object the reinforcement starts in
(Inherited from IReinforcement) |
See Also