IWestokCellularSection Properties

The IWestokCellularSection type exposes the following members.

Properties
 NameDescription
Public propertyBottomSection Gets the bottom section
Public propertyBottomTeeDepth Gets the depth of the bottom tee (in [mm])
Public propertyCellDiameter Gets the cell diameter (in [mm])
Public propertyCellPitch Gets the cell pitch (= distance between two adjacent cell centers, in [mm])
Public propertyCrossSectionalArea Gets the cross sectional area (in [mm²])
(Inherited from ISolverElementSection)
Public propertyDesignData Gets the design data
Public propertyHasMaxBottomTeeDepth Gets a value indicating whether the depth of the bottom tee will be set to the maximum value
Public propertyHasMaxTopTeeDepth Gets a value indicating whether the depth of the top tee will be set to the maximum value
Public propertyInfillSteel Gets the steel for infills
Public propertyInitialDistance Gets the distance from the start of the element to the center of the first cell (in [mm])
Public propertyMajorAxisSecondMomentOfArea Gets the major axis second moment of area (in [mm⁴])
(Inherited from ISolverElementSection)
Public propertyMinorAxisSecondMomentOfArea Gets the minor axis second moment of area (in [mm⁴])
(Inherited from ISolverElementSection)
Public propertySetbackLeft Gets the setback value at the start of the element (in [mm])
Public propertySetbackRight Gets the setback value at the end of the element (in [mm])
Public propertyShearAreaLoadedParallelToMajorAxis Gets the shear area loaded parallel to major axis (in [mm²])
(Inherited from ISolverElementSection)
Public propertyShearAreaLoadedParallelToMinorAxis Gets the shear area loaded parallel to minor axis (in [mm²])
(Inherited from ISolverElementSection)
Public propertyStiffenerCircularSteel Gets the steel for stiffeners at circular openings
Public propertyStiffenerElongatedSteel Gets the steel for stiffeners at elongated openings
Public propertyTopSection Gets the top section
Public propertyTopTeeDepth Gets the depth of the top tee (in [mm])
Public propertyTorsionConstant Gets the torsion constant (in [mm⁴])
(Inherited from ISolverElementSection)
Top
See Also
Was this helpful?
The feedback you give here is not visible to other users. We use your comments to improve the content.
Previous
Next